• What determines the price of plastic mold?

    As known, no matter what we buy, there are always different levels of quality in proportion with price. The plastic mold industry in China is flooded with companies of different levels. With more and more start-up companies in recent years, the product requirements on domestic market are becoming more and more strict. Some molds produced by certain domestic mold enterprises are in line with the European and American standards. We all know that export plastic molds are more expensive because the standard is not the same. American plastics industry association (SPIAN-102-78) classify plastic molds into five categories. Each type has its own requirements, and this classification is only applicable to plastic injection molds up to 400 tons.   TYPE 1O1 MOLDCycles: One million or moreDescription: Built for extremely high production. This is the highest price mold and is made with only the highest quality materials. The requirements are listed in detail as below:   1) detailed mold design materials are required.  …

    Mold making September 30, 2019
  • Custom Precision aluminium CNC Turning parts

    Custom Precision aluminium CNC Turning parts These sets of CNC machined components are made from aluminium plus posterior surface treatment of sand blasting followed by blue anodized oxidation. Sand blasting is a process used to propel very fine bits of metal at high-velocity to clean or etch a surface so that the metal surface looks perfect without any defect. Besides, it helps to improve the mechanical property of the metal parts. The gloss degree of the sand blast parts could improve 0.5-1 degree. The even dent on part surface could save lubricating oil as well and keep the life of aluminium parts longer.  Thus sand blasting process is widely used in products of C communication, textile machinery, airline precise parts and medical parts and more. One issue should be noted is that either sand blasting or anodized oxidation might change the dimension of the parts. Thus it is important to…

    plastic products September 15, 2019
  • Custom Precision aluminium CNC Turning parts

    Custom Precision aluminium CNC Turning parts These sets of CNC machined components are made from aluminium plus posterior surface treatment of sand blasting followed by blue anodized oxidation. Sand blasting is a process used to propel very fine bits of metal at high-velocity to clean or etch a surface so that the metal surface looks perfect without any defect. Besides, it helps to improve the mechanical property of the metal parts. The gloss degree of the sand blast parts could improve 0.5-1 degree. The even distributed dent on part surface could store lubricating oil as well and keep the life of aluminium parts longer.  Thus sand blasting process is widely used in products of C communication, textile machinery, airline precise parts and medical parts and more. One issue should be noted is that either sand blasting or anodized oxidation might change the dimension of the parts. Thus it is important…

    plastic products September 15, 2019
  • Non-Standard aluminium precision CNC Turning parts

    Non-Standard aluminium precision CNC Turning parts 5 axis machining services OEM professional made aluminum 6061 7075 custom precision cheap cnc turning parts This series of Non-Standard aluminium precision CNC Turning parts is made of aluminum 6061 7075. These components are machined by 5 axis CNC. The selection of 3 axis, 4 axis or 5 axis depends on geometry and precision requirement of the work piece. For the irregular shape with Oblique plane and oblique hole, we usually use 5 axis because they could reach any dead corner of 360 degree.   As a cnc machined component manufacturers over years, we have rich experience not only in how to make your precise parts meet the most strict tolerance but also help to develop your creative idea into economic reality by using different posterior surface treatment processes without compromising the function and cosmetic look.   Before shipment, in addition to provide dimension…

    plastic products September 15, 2019
  • Laser Cutting Spare parts

    Laser Cutting Spare parts These laser cutting small parts are only 3mm thick and the material is aluminum. It is the link arm for Connection Adjustment Applications for a client from Europe. We use laser cutting process to machine the precision aluminum parts first and then have it anodized in black color. Laser cutting is ideal for machining simple spare parts, faster and more economic. Depending on what types of parts, sometimes we combine laser cutting with CNC to improve efficiency and save cost for client. For the same custom CNC precision parts, there are different ways of machining and the cost is different as well. So it is important to let us know the specific application of your products. We will work out a most optimal way for your project.   As a CNC part exporter over years, we have rich experience not only in how to make your…

    plastic products September 15, 2019
  • Custom precision machining parts aluminum

    Custom precision machining parts aluminum We are one of the top CNC parts suppliers based in China. This series of non standard CNC tuning parts feature with black anodized process and the material is pure aluminium. Anodized surface treatment helps to develop an anodized layer on the part surface and further improve the physical property, such as better color application, higher corrosion resistance and durability. What’s more, any bright color could be achieved to make the part look nicer or low key. Thus, anodized treatment are most widely used on a CNC machined aluminium parts. However, since the process needs to go through acid and it is easy to cause environmental issues. It is important to choose a qualified supplier that meets environment standard. For all anodized parts we make, we will supply RohS and SGS reports.   As a CNC part exporter over years, we have rich experience not…

    plastic products September 15, 2019
  • CNC Tuning Parts with Color Zinc Plating

    CNC Tuning Parts with Color Zinc Plating We are a CNC machined parts manufacturer in China. This series of non standard CNC parts kits feature with color zinc plating process and the material is aluminium. There are four colors available, green, red, yellow and blue. Color zinc has stronger eroding resistance than natural zinc. Besides, when color zinc plated parts are scratched on the surface, the hexavalent chrome on the passive films nearby the scratched area could be “ inactivated“again, thus repairing the damaged surface. Therefore, color zinc plating are more applicable to industrial use while white or natural are more adopted in daily hardware.   As a CNC part exporter over years, we have rich experience not only in how to make your precise parts meet the most strict tolerance but also help to develop your creative idea into economic reality by using different posterior surface treatment processes without…

    plastic products September 15, 2019
  • Custom Precision Machining Brass Parts

    Custom Precision Machining Brass Parts Here at HS, we have over 10 years of experiencing at manufacturing precision components and provide you with with unparalleled machining CNC milling and CNC turning services. The material under this category is Tin bronze, German silver, White copper, Red copper, Brass, Bronze, Copper, etc. Brass turned parts can be used wherever there is heat and steam because of the very little friction seen and its ability to prevent corrosion. So we doesn’t not only supply precision brass for a variety of areas, but also usually manufacture bronze wear plates and mold max inserts for plastic injection molds built in oversea mold shops. Whether you are in need of complex components with high tolerances or custom parts with exact specifications, we do it all! When completion, we usually use 2D projector, Digital Micrometers plus a complete set of gauges to inspect the dimension against 2d…

    plastic products September 15, 2019
  • Non-Standard Steel Component with Nickel Deposition

    Non-Standard Steel Component with Nickel Deposition When you first look at the component, it seems to make no difference with common machined steel parts. In fact, the surface of this CNC machined part has been processed via chemical nickel deposition. Chemical nickel deposition is a process that completely differs from nickel plating.  The part features high hardness up to 1000-1100 HV after proper heat treatment. And the high wear-resistance could be as good as hard chromium plating do in dry condition. Besides, it shows perfect erode resistant property in eroding environment, such as salt, alkali and ocean . So the chemical nickel deposition is more applicable to the oil drilling fitting and boat equipment. For any machined part that is irregular in shape, you could choose the this surface process to “wrap“ a protective layer to every corner of the part, blind hole, deep inside hole, even a gap could be…

    plastic products September 12, 2019
  • Non Standard CNC thread Part and Screw Adapter

    Non Standard CNC thread Part and Screw Adapter This series of non standard CNC Machined Part feature with 3/8-16UNC Thread Screw. We have been supplying different types of custom steel components to mold shops from Canada and USA over years. The material could be either aluminum alloy, steel alloy, copper alloy or plastics. In addition to Screw adapter, we also help mold shops to manufacture custom mold inserts, mold slides, lifters and more. This is a good way for for local mold makers to save mold manufacturing cost at least by 50% if your client insists on local manufacturing. When completion, we usually use 2D projector, Digital Micrometers plus a complete set of gauges to inspect the dimension against 2d print. Each part will be shipped with a detailed CMM report. And all the parts would be shipped in a safe packing via DHL, FEDEX or UPS and your lead…

    plastic products September 12, 2019
Mobile

0086-186-8868-3865

Email
SHARE
TOP