• Tooling Design Two-stage ejection Mechanism

    What is double ejection? Some complex plastic parts often have undercuts that are too deep to be ejected directly by neither lifters nor slides.  After ejection, the molding parts may still rest on top of the ejector pins,so another stage of ejection is needed to clear the parts. This typical solution is called double ejection system which  s can be a mechanical system driven or supplemented by air or hydraulics.   Second ejection mechanism: Add an extra set of ejector plate. The first set of ejector plate that is attached to the A plate(referred as Ejector Assembly A) is to complete the first stage of ejection while the ejector plate attached to B plate (referred as Ejector Assembly B)  is to complete the second stage of ejection as shown in Figure1. Figure 1 Add series of springs or nylon plugs to make sure that both ejector assembly A and B are attached…

    Mold design June 23, 2021
Mobile

0086-186-8868-3865

Email
SHARE
TOP
Follow us on Social Media